Turtle Tattoo Designs

Call me old fashioned, but there's something about paper that I still prefer over eBooks in many situations. One advantage is you can glance at large portions of the document at the same time (by flipping around and skimming) and you can even separate a printed document and compare things side by side if needed. You can also highlight, underline, and take notes on the page.

I find myself using both on a day to day basis (well, not eBooks per se, but PDF versions of documents). I'll print out a software design document, for example, which describes in detail the stuff I'm programming or working on, for the reasons I mentioned above -- it's very handy to be able to circle something or jot down notes. On the other hand, there are a few reference documents I use on a regular basis and I like to pull up the PDF and search for specific terms.

Personally, I just ask my mommy to go to a used bookstore. They normally have a great selection of albums for around $2-$4 each, and your parents will think that you're buying something educational :p

Sounds like you need an xServe to me, Arn :D

Nice! :D

*claps excitedly*

I agree with what some people have said however with the delay of 4.0 for the ipad I would not be surprised if they end up having this feature within its native photos apps.

For someone like Steve who is so over everything it would just surprise me why they would have delays with no reason, there must be an end game reason as to why or else people have to start loosing their jobs.

I wanna know if the other way round, originally asked by OP works?

AKA AT&T iPad 2 data only microsim and plugged into iPhone 4 (with the correct "blank" APN setting)

I

















Am number four.

You might even be able to swap the hard drive right into the new Mac and it should boot just fine depending on the age of the Intel if it can run the same software version. This is handy if you don't want to reinstall everything and keep your old settings and files.

Wont the OS 'be PPC', preventing it from booting on intel hardware, and also devoid of drivers? I know the apps included on OS X are UBs, but isn't the 'core' either PPC or x86?

They keep it hidden! :D
276358

I think when you join the site they mention reading those links though. :cool:

Hi,

I am trying to run a java solution remotely on a server, I am using the below command in the terminal:

java RemoteShellClient 87.120.209.147 50001 "cmd" "java -jar -Dusername=xxx -Dpassword=xxx -DcCodes=all C:\BetInTime.jar ServiceSF"

Confidential info hidden with x's.

But am getting the below error:

Invalid input data

Could this be a syntax error?

Thanks

OK, on further inspection, the shellscript seems to rely on some batch files:


CommandRunner.class
RemoteShell.jar
SockData.class
CommandRunner.java
RemoteShellClient.class
SockData.java
JavaBuild.bat
RemoteShellClient.java
java
JavaClient.bat
RemoteShellServer.class
JavaServer.bat
RemoteShellServer.java


Contents of which are:

set ClassPath=RemoteShell.jar
java RemoteShellServer %1 %2

set ClassPath=RemoteShell.jar
java RemoteShellClient %1 %2 %3 %4

javac -g:none *.java
jar cvf RemoteShell.jar *.class

Do you think it would help to rewrite these as bash files?

I got a refund for Aperture when my nephew accidentally bought it whilst playing on my Mac. Strangely enough, I can still use the App, (even though I don't as I prefer iPhoto), I though Apple would have the power to remove stuff off your purchases list so you could no longer use it.

The 'sploit works on OS 10.1.5 and 10.2.6. The length of the password is important. The password must be longer than 7 characters for it to work.

The introduction of the Macintosh in 1984 by Steve Jobs!

I found a video of it here, by the way...
http://static.hugi.is/misc/movies/1984macintro.mov

This weekend ASU physicist Paul Davies celebrated the 50th anniversary of astronomer Frank Drake’s “start of the most ambitious scientific experiment in history”: the search for extraterrestrial intelligence (SETI); (Wall Street Journal; 4/10/10). On April 8, 1960 Drake, using the 85 foot radio telescope at Green Bank, WV, became the first to listen for signals from intelligent space aliens. But it’s been a long drought. According to Davies, "After five decades of patient listening, however, all the astronomers have to show for it is an eerie silence".

SETI, not my cup of tea.

i started folding a few days after my younger (and only) sister died from something that is being studied by F@H. she made it 2 days past her 35th birthday, and left a 4 month old baby and widow (and me) behind. i've been folding ever since, and won't stop until they quit giving out work units. period.

thanks to all who fold here/there/everywhere.

So when you turn the machine upside down (with it facing you as normal) and take the battery our there is not a little door exposed facing you? Are there instructions printed under where the battery is?

It should look like this with the door open (sorry about the quality, camera phone and max file size here)Absolutely no door. I was like WTF? when I opened it up and saw nothing.:mad:

Thanks to both of you.

to get your VHS source onto your computer it would have to be digitized first. So either you digitized the video or someone did it for you. How this was done determines the base quality of your DIGITAL source. It can't be better than your source, but it can be converted to a more useful or less useful digital format (h.264 = more / mpeg2 = less for example).

Ah, I'm stupid. Actually I knew this, do not know how I forgot it when explaining what I am asking. I forgot that I know, that it is the hooked up hardware that changes the source from analogue to digital. Why else should I use this type of thing here called "A/D-converter". (Btw, the A/D-converter I am using is ADVC-300 via firewire and some times EyeTV250 via USB).
I can't explain to myself why I mixed up the hardware's job with what the software does. :o:confused:

it seems your asking how imovie handles video import for various versions.
Yes, that's it.
...but i can tell your quoting some rather old versions ...
I am using Vers. 3 and 5, because I have two PPC-Macs, that I possess for a long time, but never had any need to use iMovie before. I use my Macs 5-6 years (from the day on they were bought). The next buy (first Intel) is actually due, but I am still procrastinating it, but decided to start saving my VHS to an external disk better now then later and so I use my PPC-Macs with the old versions of iMovie they came with.

Noise filtering would be a filter...that's a post process.... - in the software not the hardware, ok.

Have no idea what a "line time base" is.
ah, baseline time correction was the word I was searching for. ADVC uses TBC, EyeTV not. I thought Maybe iMovie does this too, on the fly.

In iMovieHD 5 you can choose that it saves the incoming material as mpeg4. I do not mean the converting to mpeg4 or whatever type after editing (chopping parts in between and all that stuff).
I thought the ADVC-300 changes the analogue one to DV and iMovie puts it in mpeg4.
After that I would cut/edit the film and convert it to h.264.
I choose to let iMovie5 record as DV, because I could not see the sense in capturing it as mpeg4, when I plan to convert it to h.264 afterwords.

If you've got your VCR hooked up to a DV camcorder and the DV camcorder attached to your Mac via Firewire, you can think of capturing it in iMovie as a file transfer. The camcorder is encoding the VCR's output to standard PAL DV, and your Mac is just recording that data.

If you try to do any colour correction or what have you in iMovie, a different engine in different versions might result in different quality. But these versions are so old I don't think you'll find much comparison online — probably best to just suck it and see.

Ok, thanks.

I am assuming this now, (right?): If I plan to save the films on an external disk and convert them to h.264 later, it does not affect the quality, if I use DV coming from iMovie2 or 5.
Example:
1. capture VHS in iMovie
2. save them to disk
3. forget about them
4. buy an Intel-Mac at the end of the year (because I do not want my PPC spend nights with converting DV to h.264
5. open DV file on external disk in mpegstreamclip(converter-app) on new Intel Mac, choose "convert to h.264", setting bitrate and everything I like.

It does not matter if iMovie2 saved it as DV or iMovie5 saved it as DV, right?

PS: I know, me using an ADVC-300 after my questions, sounds like a kid with one guitar lesson playing a Gibson guitar. :)

Hmmm I bet my wife will like this lady. Thanks for the Stocking Stuffer. :)

As long as it doesn't interrupt my flight in 2 weeks, I don't care. ;)

Somewhere in 2009/2010, I can't really remember now I bought the 21inch iMac. It was working perfectly fine up until January 2011 where it started lagging, it became very slow and eventually it kept freezing...

It is now completely unworkable, it originally has the Mac OSX Leopard system and I cannot at all use it. When it is powered on it stays on the apple screen for like 10+/- minutes. After a while the background shows up but nothing on screen and it sits there frozen. When the power button is pressed once, the screen turns off, when the power button is pressed again, screen comes back on with everything already loaded, you can see the dock, and startup programs but everything is completely frozen, I can move the mouse but apart from that it's all dead (even the keyboard). After like 10/20 +- minutes it unfreezes and the computer is usable... the problem is that it keeps freezing every now and then...

While it unfroze, I managed to use a tool called Yasu to clean it up, I also checked the hard drive (1TB one) and everything was said to be in normal conditon.

Rebooted the mac, and the same thing happens all over again...

I tried running the install disc that originally came with the iMac but it does not want to boot. I tried booting in safe mode, it takes ages to boot up and when it does, it freezes on the login screen. I used the applications CD where you have to hold D, this booted up, I checked the system and everything was completely fine.

I then tried booting up (holding C) from a Windows Live CD, and it booted up perfectly fine, did a disk check, all was stated as working.

I then tried booting from the install disc and it just won't boot. It freezes up and I have to wait like 10 to 20 minutes to take out the CD because it won't come out.

Before I take it to Apple (#!��$"�# piece of crap) I would like to see if there's anything else I can do?

Since other CD's are booting up perfectly fine, I was thinking of installing Ubuntu Linux and maybe then trying to reinstall Mac OSX using the original CD?

Any help? Please!!!!!!!!!!!! and thank you in advance.



,____, - - - - - - - - - :apple: :mad:
//'
~

I cant speak for the porsche, but the LaCie d2 is a great drive. I have a 250GB one w/ FW800 and its great. i've had it for 9-10 months now, and it hasnt frozen or crashed on me or anything. It emits a very light hum, and i rarely hear the drive. the only time it makes a lot of noise is when im capturing video, or scrubbing really quickly in FCP.

Me too. It only sent video. However, my sister who has a Mac Mini was using one and said in her iDVD software for audio you had to tell it to push the audio through the Mini Display port/HDMI and then she got sound, so maybe that would work on my MBP and yours.

If you have an iPad2, I highly highly recommend getting the HDMI adapter they have. 1 to 1 exact copy of your iPad onto your big screen TV. Makes the Apple TV not necessary as you can get what you get on it and more through your iPad2 to HDMI.

I also bought a 15' HDMI cable so I can have my iPad2 with me on my couch. But I digress.

Mark

BBEdit and a textbook, claro que si. ;)

People who don't punctuate properly should be punched in the face. Zero tolerance...

I have found SL to be very stable.

At this point in time, I think apple has a very stable OS. Third party drivers have been out for a while, lot of the bugs that have snuck through 10.6.0 have been dealt with. It is a solid product to use at this stage.