Turtle Tattoo Designs

I'm guessing it is something with no-ip then, what happens if you try to access the pictures via the IP address and port (if you are using no-ip to forward to a port other than port 80)?


The problem still persists when I use the IP address... good thinking though, I was hoping beyond hope that you'd be right...

SL has been great for me too. The problems your having must be maddening tho. I had a MDD g4 that would randomly freeze for no reason, drove me up the wall!

I think this is just for Apple to not have to admit defeat.

I�m assuming that it�s an Apple LCD
If not what make is your LCD?
How old is it?

It sounds like dust and oxide are creeping in, perhaps from improper sealing of any of the multiple lamintes that comprise an LCD screen.

If it has a cold cathode tube I can�t see the reason for only the outer edges to yellow. If the light pipe is oxygen sensitive, it might account for it yellowing around the edges.

EL backing also ages uniformly, but most LCD�s don�t use this technology.

If you or anybody else has ever taken the screen apart, you might have improperly put it back together. Perhaps the screen is pressing to tightly against the frame. This would cause tweening of the matrix and bending of the light pipe, and ether one could account for a localized spectral shift.

I am just throwing out ideas to see what people think.

Hopefully not because another air traffic controller taking a snooze.

Any one planning to camp out?

So..what they're saying is essentially if all of Apples products stops selling it could be a problem.

So when you turn the machine upside down (with it facing you as normal) and take the battery our there is not a little door exposed facing you? Are there instructions printed under where the battery is?

It should look like this with the door open (sorry about the quality, camera phone and max file size here)Absolutely no door. I was like WTF? when I opened it up and saw nothing.:mad:

Hi all, I recently rebooted and have noticed a small blue "bubble" on my screen. It is transparent and turns opaque when you mouse over it. If you click on it, it activates the function usually assigned to the F10 key for Expose. I can move it around the screen like something from Konfabulator. I do have both Konfabulator and Growl installed, but they are both off right now.. and this thing still won't go away. Any help?

The official Mac Rumors apple.

Well, if you know someone in a Bio lab who handles ordering ...

Whatman is having a special through Fisher Scientific, where if you spend $300+ on Whatman products, they give you a free 512 Ipod Shuffle. It is trivial to spend this much if you do a lot of protein work. Nitrocellulose membranes are pretty expensive, and Whatman Optitran is good stuff. Some labs are spending this amount anyway every couple of months for membranes.

Jim

Congrats on a nice purchase.

Here is the Everymac.com page for that machine. (http://www.everymac.com/systems/apple/powermac_g5/stats/powermac_g5_2.5_dp.html)

As for future support for syncing iOS devices, iTunes will be the biggest culprit. iTunes 10 requires 10.5.8, it's likely that the next major update to iTunes requires 10.6, which PPC's can't run. The big question is, how soon until that happens? With Lion due out this summer, I doubt it will take 2 years before Apple drops support for Leopard.

"There are lots because no one has been buying in anticipation"

i was at the local Apple store 4 days ago and the place was packed and i watched 3 iMacs and 7 notebooks and a mini leave in just over an hour. i mentioned MWSF to an employee and he laughed and said most people didn't know about it. they are not having ANY trouble selling stuff in the run up.

yeah, people who hit these forums are not buying, but everyone else is going to town and laying their cards down. look at estimates for Apples sales over the holiday! :D

also, for a pro app, soundtrack is much faster than garage band. you can tell that it was very poorly written. i hope gb2 will be much better in terms of speed. 2.5 more hours... longest of my life

Recently I have had an issue where if I get 1 piece of new mail the Dock Icon tells me that there is 3 instead of one. If I quit and relaunch Mail it will display correclty...any ideas?

thanks...

It doesn't say that you do. Looks real though. I'm not the seller.

Wirelessly posted (Mozilla/5.0 (iPhone; U; CPU iPhone OS 4_3 like Mac OS X; ja-jp) AppleWebKit/533.17.9 (KHTML, like Gecko) Version/5.0.2 Mobile/8F190 Safari/6533.18.5)

So is there anyone at the Pacific Center yet ?

Hi all

Is there anywhere to get some cheap ram for the 2008 Mac Pro

It seems to be so expensive everywhere that it almost makes it not worth the upgrade!

After some research my top 3 sorted options are:

1.- OCZ Vertex 2 120GB
2.- Intel X25-M 120GB
3.- Samsung 470 Series 128GB

I will be using it as my boot drive for Mac OS X 10.6.7, any suggestion which one would be the best option for speed ?, thanks

These are ok value for money options, try not to go with the OCz though if this article is anything to go by:

http://blog.macsales.com/9438-not-all-ssd%E2%80%99s-are-created-equal-the-story-continues

OWC, Micron\Crucial and Intel are the best brands and use the most quality components. With OWC being better than the Micron\Crucial which uses a slower Marvell Controller.

^ love that you dig Smart water. Thankfully my work carries it, I was getting sick of Dasani!

Apple
Bowers & Wilkins (Headphones)
Sennheiser (Earbuds)
Canon cameras
PRS Electric Guitars
Martin Acoustic Guitars
Laney Amplifiers

Ray Ban sunglasses
Dr. Marten boots
New Balance shoes
Pacsun Jeans
H&M T-shirts

Glaceau Smartwater
Axe bodyspray (kilo)
Volkswagen

I'm trying to forward requests from one port to another and running into problems.

I have a Mac Server (10.5) and a number of Mac clients. I want requests going to one of my clients for port 80 (192.168.1.20:80), to go instead to port 10080 (192.168.1.20:10080).

I've tried everything I can but I can't seem to get this to work. Here's what I've done:

I've added this to my ipfw.conf file:
add 100 fwd 192.168.1.20,80 ip from any to 192.168.1.20 dst-port 10080

But that didn't seem to work.


I also tried to add the correct info the my natd.conf.apple file.

natd.conf.apple:
interface en0
natportmap_interface en1
dynamic yes
log yes
log_denied no
deny_incoming no
use_sockets yes
same_ports yes
unregistered_only yes
reverse no
proxy_only no
clamp_mss yes
redirect_port tcp 192.168.1.20:80 192.168.1.20:10080


I stop and restart both NAT and Firewall from the Server Admin.

Only other thing I can figure is that I've got two NIC's in the server (en1 & en0) en1 is where all the clients are and the 192.168.1.xxx IP addresses. But en0 is the direct connection to the internet. So is it possible that my port forwarding is working, but on the wrong interface?


Is there something I'm doing wrong here?

Any help would be greatly appreciated. Thanks in advance.

The OP stated iLife 11

---

---